led_state_def.h

Go to the documentation of this file.

/*
 * Copyright (c) 2024 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
 */
 
#include "led_state.h"
#include <caf/led_effect.h>
 
/* This configuration file is included only once from led_state module and holds
 * information about LED effect associated with each state.
 */
 
/* This structure enforces the header file is included only once in the build.
 * Violating this requirement triggers a multiple definition error at link time.
 */
const struct {} led_state_def_include_once;
 
 
/* Map function to LED ID */
static const uint8_t led_map[LED_ID_COUNT] = {
        [LED_ID_SYSTEM_STATE] = 0,
        [LED_ID_PEER_STATE] = 1
};
 
/* On the nRF54L15 SoC, you can only use the **GPIO1** port for PWM hardware peripheral output.
 * Because of that, on the DK PCA10156 revision v0.9.3 **LED 0** and **LED 2** cannot be used
 * for PWM output.
 *
 * You can still use these LEDs with the PWM LED driver, but you must set the LED color to
 * `LED_COLOR(255, 255, 255)` or `LED_COLOR(0, 0, 0)`. You must also disable the
 * `CONFIG_PWM_NRFX_NO_GLITCH_DUTY_100` Kconfig option. This ensures the PWM peripheral is not used
 * for the mentioned LEDs.
 */
 
static const struct led_effect led_system_state_effect[LED_SYSTEM_STATE_COUNT] = {
        [LED_SYSTEM_STATE_IDLE]     = LED_EFFECT_LED_ON(LED_COLOR(255, 255, 255)),
        [LED_SYSTEM_STATE_CHARGING] = LED_EFFECT_LED_ON(LED_COLOR(255, 255, 255)),
        [LED_SYSTEM_STATE_ERROR]    = LED_EFFECT_LED_BLINK(200, LED_COLOR(255, 255, 255)),
};
 
static const struct led_effect led_peer_state_effect[LED_PEER_COUNT][LED_PEER_STATE_COUNT] = {
        {[LED_PEER_STATE_DISCONNECTED]   = LED_EFFECT_LED_OFF(),
         [LED_PEER_STATE_CONNECTED]      = LED_EFFECT_LED_ON(LED_COLOR(100, 100, 100)),
         [LED_PEER_STATE_PEER_SEARCH]    = LED_EFFECT_LED_BREATH(1000, LED_COLOR(100, 100, 100)),
         [LED_PEER_STATE_CONFIRM_SELECT] = LED_EFFECT_LED_BLINK(50, LED_COLOR(100, 100, 100)),
         [LED_PEER_STATE_CONFIRM_ERASE]  = LED_EFFECT_LED_BLINK(25, LED_COLOR(100, 100, 100)),
         [LED_PEER_STATE_ERASE_ADV]      = LED_EFFECT_LED_BREATH(100, LED_COLOR(100, 100, 100)),
        },
};