sdc_hci_cmd_vs_qos_conn_event_report_enable()

uint8_t sdc_hci_cmd_vs_qos_conn_event_report_enable

(

const sdc_hci_cmd_vs_qos_conn_event_report_enable_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_vs.h>

QoS Connection Event Reports enable.

This vendor specific command is used to enable or disable generation of QoS Connection event reports. See sdc_hci_subevent_vs_qos_conn_event_report_t. When enabled, one report is generated every scheduled connection event. That is, QoS Connection Connection event reports are not generated for skipped connection events. Connection events may be skipped due to scheduling conflicts, peripheral latency, or subrating.

Note

If the application does not pull a report in time, it will be overwritten.

After HCI Reset, this feature is disabled.

Event(s) generated (unless masked away):

When the command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.