sdc_hci_cmd_ip_read_local_version_information()

uint8_t sdc_hci_cmd_ip_read_local_version_information

(

sdc_hci_cmd_ip_read_local_version_information_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_cmd_info_params.h>

Read Local Version Information.

The description below is extracted from Core_v6.3, Vol 4, Part E, Section 7.4.1

This command reads the values for the version information for the local Controller.

The HCI_Version information defines the version information of the HCI layer. The LMP_Version information defines the version of the LMP. The Company_Identifier information indicates the manufacturer of the local device.

The HCI_Subversion and LMP_Subversion are vendor-specific.

Event(s) generated (unless masked away):

When the HCI_Read_Local_Version_Information command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.