sdc_hci_cmd_le_read_max_data_length()

uint8_t sdc_hci_cmd_le_read_max_data_length

(

sdc_hci_cmd_le_read_max_data_length_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Read Maximum Data Length.

The description below is extracted from Core_v6.3, Vol 4, Part E, Section 7.8.46

This command allows the Host to read the Controller’s maximum supported payload octets and packet duration times for transmission and reception (Supported_Max_TX_Octets, Supported_Max_TX_Time, Supported_Max_RX_Octets, and Supported_Max_RX_Time, see [Vol 6] Part B, Section 4.5.10).

Event(s) generated (unless masked away):

When the HCI_LE_Read_Maximum_Data_Length command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.