◆ sdc_hci_cmd_le_remove_device_from_periodic_adv_list()

uint8_t sdc_hci_cmd_le_remove_device_from_periodic_adv_list ( const sdc_hci_cmd_le_remove_device_from_periodic_adv_list_t * p_params )

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Remove Device From Periodic Advertiser List.

The description below is extracted from Core_v6.3, Vol 4, Part E, Section 7.8.71

This command is used to remove one entry from the list of Periodic Advertisers stored in the Controller. Removals from the Periodic Advertisers List take effect immediately.

Errors:

See Section 4.5.2 for a list of error types and descriptions.

Type   Condition                                            Error code
MC     An HCI_LE_Periodic_Advertising_Create_Sync is        Command Disallowed (0x0C)
       pending
MC     The entry is not on the list.                        Unknown Advertising Identifier
                                                            (0x42)

Event(s) generated (unless masked away):

When the HCI_LE_Remove_Device_From_Periodic_Advertiser_List command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in] p_params Input parameters.

Return values

0	if success.

Returns: Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.