sdc_hci_cmd_cb_read_transmit_power_level()

uint8_t sdc_hci_cmd_cb_read_transmit_power_level	(	const sdc_hci_cmd_cb_read_transmit_power_level_t *	p_params,
		sdc_hci_cmd_cb_read_transmit_power_level_return_t *	p_return )

#include <softdevice_controller/include/sdc_hci_cmd_controller_baseband.h>

Read Transmit Power Level.

The description below is extracted from Core_v6.3, Vol 4, Part E, Section 7.3.35

This command reads the values for the TX_Power_Level parameter for the specified Connection_Handle. The Connection_Handle shall be a Connection_Handle for an ACL connection.

Event(s) generated (unless masked away):

When the HCI_Read_Transmit_Power_Level command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]	p_params	Input parameters.
[out]	p_return	Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.