Zephyr API 4.4.99
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
Files
nPM2100 Devicetree helpers
Device Drivers » Regulator | Devicetree » Devicetree Regulator API

Nordic nPM2100 PMIC regulator driver Devicetree helpers More...

Files

file  npm2100.h
 Header file for nPM2100 Devicetree helpers.
 

nPM2100 LDOSW regulator modes

#define NPM2100_REG_LDSW_EN   0x01U
 Enable load switch.
 

nPM2100 BOOST DPS modes

#define NPM2100_REG_DPS_ALLOW   0x01U
 Allow dynamic power scaling.
 
#define NPM2100_REG_DPS_ALLOWLP   0x02U
 Allow dynamic power scaling in low power.
 

nPM2100 regulator operating modes

#define NPM2100_REG_OPER_AUTO   0x00U
 Automatic mode.
 
#define NPM2100_REG_OPER_HP   0x04U
 High power mode.
 
#define NPM2100_REG_OPER_LP   0x08U
 Low power mode.
 
#define NPM2100_REG_OPER_ULP   0x0CU
 Ultra-low power mode.
 
#define NPM2100_REG_OPER_PASS   0x10U
 Pass-through mode.
 
#define NPM2100_REG_OPER_NOHP   0x14U
 No high power mode.
 
#define NPM2100_REG_OPER_OFF   0x18U
 Off mode.
 

nPM2100 regulator forced modes when GPIO active

#define NPM2100_REG_FORCE_HP   0x20U
 Force high performance mode.
 
#define NPM2100_REG_FORCE_LP   0x40U
 Force low power mode.
 
#define NPM2100_REG_FORCE_ULP   0x60U
 Force ultra-low power mode.
 
#define NPM2100_REG_FORCE_PASS   0x80U
 Force pass-through mode.
 
#define NPM2100_REG_FORCE_NOHP   0xA0U
 Force no high performance mode.
 

Detailed Description

Nordic nPM2100 PMIC regulator driver Devicetree helpers

Macro Definition Documentation

◆ NPM2100_REG_DPS_ALLOW

#define NPM2100_REG_DPS_ALLOW   0x01U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Allow dynamic power scaling.

◆ NPM2100_REG_DPS_ALLOWLP

#define NPM2100_REG_DPS_ALLOWLP   0x02U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Allow dynamic power scaling in low power.

◆ NPM2100_REG_FORCE_HP

#define NPM2100_REG_FORCE_HP   0x20U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Force high performance mode.

◆ NPM2100_REG_FORCE_LP

#define NPM2100_REG_FORCE_LP   0x40U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Force low power mode.

◆ NPM2100_REG_FORCE_NOHP

#define NPM2100_REG_FORCE_NOHP   0xA0U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Force no high performance mode.

◆ NPM2100_REG_FORCE_PASS

#define NPM2100_REG_FORCE_PASS   0x80U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Force pass-through mode.

◆ NPM2100_REG_FORCE_ULP

#define NPM2100_REG_FORCE_ULP   0x60U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Force ultra-low power mode.

◆ NPM2100_REG_LDSW_EN

#define NPM2100_REG_LDSW_EN   0x01U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Enable load switch.

◆ NPM2100_REG_OPER_AUTO

#define NPM2100_REG_OPER_AUTO   0x00U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Automatic mode.

◆ NPM2100_REG_OPER_HP

#define NPM2100_REG_OPER_HP   0x04U

#include <zephyr/dt-bindings/regulator/npm2100.h>

High power mode.

◆ NPM2100_REG_OPER_LP

#define NPM2100_REG_OPER_LP   0x08U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Low power mode.

◆ NPM2100_REG_OPER_NOHP

#define NPM2100_REG_OPER_NOHP   0x14U

#include <zephyr/dt-bindings/regulator/npm2100.h>

No high power mode.

◆ NPM2100_REG_OPER_OFF

#define NPM2100_REG_OPER_OFF   0x18U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Off mode.

◆ NPM2100_REG_OPER_PASS

#define NPM2100_REG_OPER_PASS   0x10U

#include <zephyr/dt-bindings/regulator/npm2100.h>

Pass-through mode.

◆ NPM2100_REG_OPER_ULP

#define NPM2100_REG_OPER_ULP   0x0CU

#include <zephyr/dt-bindings/regulator/npm2100.h>

Ultra-low power mode.