This structure defines the command responsible for initializing the UMAC. After the host driver brings up, the host sends NRF_WIFI_CMD_INIT to the RPU. The RPU then performs the initialization and responds with NRF_WIFI_EVENT_INIT_DONE once the initialization is completed. More...

#include <nrf71_wifi_common.h>

Data Fields
struct nrf_wifi_sys_head	sys_head

unsigned int	wdev_id

struct nrf_wifi_sys_params	sys_params

struct rx_buf_pool_params	rx_buf_pools [3]

struct nrf_wifi_data_config_params	data_config_params

struct temp_vbat_config	temp_vbat_config_params

unsigned char	country_code [2]

unsigned char	op_band

unsigned char	mgmt_buff_offload

unsigned int	feature_flags

unsigned int	disable_beamforming

unsigned int	discon_timeout

unsigned char	ps_exit_strategy

unsigned int	watchdog_timer_val

unsigned char	keep_alive_enable

unsigned int	keep_alive_period

unsigned int	display_scan_bss_limit

unsigned int	coex_disable_ptiwin_for_wifi_scan

unsigned char	raw_scan_enable

unsigned int	max_ps_poll_fail_cnt

unsigned int	stbc_enable_in_ht

unsigned int	dbs_war_ctrl

unsigned int	dynamic_ed

unsigned int	inband_scan_type

unsigned char	tcp_ip_checksum_offload

struct nrf_wifi_ftm_loc_params	ftm_loc_params

unsigned char	ldpc_config

unsigned int	protocol_mode

unsigned char	display_scan_abort_on_bss_limit

unsigned char	nrf_wifi_11ac_downgrade_disable

Detailed Description

This structure defines the command responsible for initializing the UMAC. After the host driver brings up, the host sends NRF_WIFI_CMD_INIT to the RPU. The RPU then performs the initialization and responds with NRF_WIFI_EVENT_INIT_DONE once the initialization is completed.

The documentation for this struct was generated from the following file:

drivers/wifi/nrf71/fw_if/nrf71_wifi_common.h

Data Fields

Detailed Description