nRF Connect SDK API 3.4.99
Loading...
Searching...
No Matches
rpu_conf_params Struct Reference

This structure describes different Physical Layer (PHY) configuration parameters used in RF test and Radio test scenarios. These parameters are specific to testing and evaluating the performance of the radio hardware. More...

#include <nrf71_wifi_common.h>

Data Fields

unsigned char nss
 
unsigned char antenna_sel
 
unsigned char tx_pkt_chnl_bw
 
unsigned char tx_pkt_tput_mode
 
unsigned char tx_pkt_sgi
 
unsigned char tx_pkt_nss
 
unsigned char tx_pkt_preamble
 
unsigned char tx_pkt_stbc
 
unsigned char tx_pkt_fec_coding
 
signed char tx_pkt_mcs
 
signed char tx_pkt_rate
 
signed char phy_threshold
 
unsigned int phy_calib
 
signed int op_mode
 
struct chan_params chan
 
unsigned char tx_mode
 
signed int tx_pkt_num
 
unsigned short tx_pkt_len
 
unsigned int tx_power
 
unsigned char tx
 
unsigned char rx
 
unsigned char aux_adc_input_chain_id
 
unsigned char agg
 
unsigned char he_ltf
 
unsigned char he_gi
 
unsigned char set_he_ltf_gi
 
unsigned char power_save
 
unsigned int rts_threshold
 
unsigned int uapsd_queue
 
unsigned int tx_pkt_gap_us
 
unsigned char wlan_ant_switch_ctrl
 
unsigned char sr_ant_switch_ctrl
 
unsigned char ru_tone
 
unsigned char ru_index
 
signed char tx_tone_freq
 
unsigned char tx_tone_type
 
signed short int tx_tone_dc_offset_i
 
signed short int tx_tone_dc_offset_q
 
unsigned char lna_gain
 
unsigned char bb_gain
 
unsigned short int capture_length
 
unsigned short int capture_timeout
 
unsigned char ed_thresh_ofdm
 
unsigned char ed_thresh_dsss
 
unsigned char bypass_regulatory
 
unsigned char country_code [2]
 
unsigned int tx_pkt_cw
 
unsigned int rx_bss_color
 
unsigned int rx_station_id
 
unsigned char tx_dcm
 
unsigned char tx_doppler
 
unsigned char tx_midamble_periodicity
 
unsigned char tx_106_tone
 
unsigned short tx_legacy_length
 
unsigned char tx_fec_padd_factor
 
unsigned char tx_num_he_ltf
 
unsigned int rf_params_addr [22]
 
unsigned int vtf_buffer_addr
 
unsigned char bss_check_enable
 

Detailed Description

This structure describes different Physical Layer (PHY) configuration parameters used in RF test and Radio test scenarios. These parameters are specific to testing and evaluating the performance of the radio hardware.


The documentation for this struct was generated from the following file: