nrfy_pwm_config_t Struct Reference

PWM configuration structure. More...

#include <nrfy_pwm.h>

Data Fields
uint32_t	output_pins [NRF_PWM_CHANNEL_COUNT]
	Pin numbers for individual output channels (optional).
uint16_t	top_value
	Value up to which the pulse generator counter counts.
nrf_pwm_clk_t	base_clock
	Base clock frequency.
nrf_pwm_mode_t	count_mode
	Operating mode of the pulse generator counter.
nrf_pwm_dec_load_t	load_mode
	Mode of loading sequence data from RAM.
nrf_pwm_dec_step_t	step_mode
	Mode of advancing the active sequence.
bool	skip_psel_cfg
	Skip pin selection configuration.

Detailed Description

PWM configuration structure.

Field Documentation

output_pins

uint32_t nrfy_pwm_config_t::output_pins[NRF_PWM_CHANNEL_COUNT]

Pin numbers for individual output channels (optional).

Use NRF_PWM_PIN_NOT_CONNECTED if a given output channel is not needed.

skip_psel_cfg

bool nrfy_pwm_config_t::skip_psel_cfg

Skip pin selection configuration.

When set to true, the driver does not modify pin select registers in the peripheral. Those registers are supposed to be set up externally before the driver is initialized.

Note

When both GPIO configuration and pin selection are to be skipped, the structure fields that specify pins can be omitted, as they are ignored anyway.

---

The documentation for this struct was generated from the following file:

• haly/nrfy_pwm.h