ti-k3-pinctrl.h File Reference

Go to the source code of this file.

Macros
#define	PULLUDEN_SHIFT   16
#define	PULLTYPESEL_SHIFT   17
#define	RXACTIVE_SHIFT   18
#define	PULL_DISABLE   (1 << PULLUDEN_SHIFT)
#define	PULL_ENABLE   (0 << PULLUDEN_SHIFT)
#define	PULL_UP   ((1 << PULLTYPESEL_SHIFT) | PULL_ENABLE)
#define	PULL_DOWN   ((0 << PULLTYPESEL_SHIFT) | PULL_ENABLE)
#define	INPUT_ENABLE   (1 << RXACTIVE_SHIFT)
#define	INPUT_DISABLE   (0 << RXACTIVE_SHIFT)
#define	PIN_OUTPUT   (INPUT_DISABLE | PULL_DISABLE)
#define	PIN_OUTPUT_PULLUP   (INPUT_DISABLE | PULL_UP)
#define	PIN_OUTPUT_PULLDOWN   (INPUT_DISABLE | PULL_DOWN)
#define	PIN_INPUT   (INPUT_ENABLE | PULL_DISABLE)
#define	PIN_INPUT_PULLUP   (INPUT_ENABLE | PULL_UP)
#define	PIN_INPUT_PULLDOWN   (INPUT_ENABLE | PULL_DOWN)
#define	MUX_MODE_0   0
#define	MUX_MODE_1   1
#define	MUX_MODE_2   2
#define	MUX_MODE_3   3
#define	MUX_MODE_4   4
#define	MUX_MODE_5   5
#define	MUX_MODE_6   6
#define	MUX_MODE_7   7
#define	MUX_MODE_8   8
#define	MUX_MODE_9   9
#define	MUX_MODE_10   10
#define	MUX_MODE_11   11
#define	MUX_MODE_12   12
#define	MUX_MODE_13   13
#define	MUX_MODE_14   14
#define	K3_PINMUX(offset, value, mux_mode)

Macro Definition Documentation

INPUT_DISABLE

#define INPUT_DISABLE   (0 << RXACTIVE_SHIFT)

INPUT_ENABLE

#define INPUT_ENABLE   (1 << RXACTIVE_SHIFT)

K3_PINMUX

#define K3_PINMUX	(		offset,
			value,
			mux_mode )

Value:

(((offset) & 0x1fff)) ((value) | (mux_mode))

MUX_MODE_0

#define MUX_MODE_0   0

MUX_MODE_1

#define MUX_MODE_1   1

MUX_MODE_10

#define MUX_MODE_10   10

MUX_MODE_11

#define MUX_MODE_11   11

MUX_MODE_12

#define MUX_MODE_12   12

MUX_MODE_13

#define MUX_MODE_13   13

MUX_MODE_14

#define MUX_MODE_14   14

MUX_MODE_2

#define MUX_MODE_2   2

MUX_MODE_3

#define MUX_MODE_3   3

MUX_MODE_4

#define MUX_MODE_4   4

MUX_MODE_5

#define MUX_MODE_5   5

MUX_MODE_6

#define MUX_MODE_6   6

MUX_MODE_7

#define MUX_MODE_7   7

MUX_MODE_8

#define MUX_MODE_8   8

MUX_MODE_9

#define MUX_MODE_9   9

PIN_INPUT

#define PIN_INPUT   (INPUT_ENABLE | PULL_DISABLE)

PIN_INPUT_PULLDOWN

#define PIN_INPUT_PULLDOWN   (INPUT_ENABLE | PULL_DOWN)

PIN_INPUT_PULLUP

#define PIN_INPUT_PULLUP   (INPUT_ENABLE | PULL_UP)

PIN_OUTPUT

#define PIN_OUTPUT   (INPUT_DISABLE | PULL_DISABLE)

PIN_OUTPUT_PULLDOWN

#define PIN_OUTPUT_PULLDOWN   (INPUT_DISABLE | PULL_DOWN)

PIN_OUTPUT_PULLUP

#define PIN_OUTPUT_PULLUP   (INPUT_DISABLE | PULL_UP)

PULL_DISABLE

#define PULL_DISABLE   (1 << PULLUDEN_SHIFT)

PULL_DOWN

#define PULL_DOWN   ((0 << PULLTYPESEL_SHIFT) | PULL_ENABLE)

PULL_ENABLE

#define PULL_ENABLE   (0 << PULLUDEN_SHIFT)

PULL_UP

#define PULL_UP   ((1 << PULLTYPESEL_SHIFT) | PULL_ENABLE)

PULLTYPESEL_SHIFT

#define PULLTYPESEL_SHIFT   17

PULLUDEN_SHIFT

#define PULLUDEN_SHIFT   16

RXACTIVE_SHIFT

#define RXACTIVE_SHIFT   18