nrfxlib API 3.3.99
Loading...
Searching...
No Matches
Data Fields
sdc_hci_cmd_vs_scan_channel_map_set_t Struct Reference
SoftDevice Controller API » SoftDevice Controller HCI Interface » SoftDevice Controller HCI Interface for Controller & Baseband commands | SoftDevice Controller API » SoftDevice Controller HCI Interface » SoftDevice Controller HCI Interface for Informational parameters | SoftDevice Controller API » SoftDevice Controller HCI Interface » SoftDevice Controller HCI Interface for LE Controller commands | SoftDevice Controller API » SoftDevice Controller HCI Interface » SoftDevice Controller HCI Interface for Link Control commands | SoftDevice Controller API » SoftDevice Controller HCI Interface » SoftDevice Controller HCI Interface for Status parameters | SoftDevice Controller API » SoftDevice Controller Vendor Specific HCI Interface » Parameters

Set the channel map for scanning and initiating. command parameter(s). More...

#include <sdc_hci_vs.h>

Data Fields

uint8_t channel_map [5]
 This parameter contains 40 1-bit fields. The nth such field (in the range 0 to 39) contains the value for the Link Layer channel index n. Set the bit to 1 to enable the channel. Only channel index 37, 38 and 39 are supported. The remaining bits shall be set to 1.
 

Detailed Description

Set the channel map for scanning and initiating. command parameter(s).

The documentation for this struct was generated from the following file: