Configuration parameters for the Front End Module Simple GPIO variant. More...

#include <mpsl_fem_config_simple_gpio.h>

Data Fields
struct {
uint32_t pa_time_gap_us
uint32_t lna_time_gap_us
int8_t pa_gain_db
int8_t lna_gain_db
int8_t bypass_gain_db
}	fem_config
mpsl_fem_gpiote_pin_config_t	pa_pin_config
mpsl_fem_gpiote_pin_config_t	lna_pin_config
mpsl_fem_gpiote_pin_config_t	tx_bypass_pin_config
mpsl_fem_gpiote_pin_config_t	rx_bypass_pin_config
uint8_t	dppi_channels [3]
uint8_t	egu_instance_no
uint8_t	egu_channels [3]

Detailed Description

Configuration parameters for the Front End Module Simple GPIO variant.

A Simple GPIO Front End Module may be used with all Front End Modules which use one wire for a Power Amplifier (PA) and one wire for a Linear Noise Amplifier (LNA).

The documentation for this struct was generated from the following file:

mpsl/fem/simple_gpio/include/mpsl_fem_config_simple_gpio.h

Data Fields

Detailed Description