Buttons

The Buttons sample demonstrates how to configure and use buttons with event handling on the nRF54L15 DK.

Requirements

The sample supports the following development kits:

Simple board variantsMCUboot board variants

The following board variants do not have DFU capabilities:

S115:

Hardware platform	PCA	Board target
nRF54L15 DK	PCA10156	bm_nrf54l15dk/nrf54l15/cpuapp/s115_softdevice
nRF54L15 DK (emulating nRF54L10)	PCA10156	bm_nrf54l15dk/nrf54l10/cpuapp/s115_softdevice
nRF54L15 DK (emulating nRF54L05)	PCA10156	bm_nrf54l15dk/nrf54l05/cpuapp/s115_softdevice
nRF54LM20 DK	PCA10184	bm_nrf54lm20dk/nrf54lm20a/cpuapp/s115_softdevice
nRF54LS05 DK	PCA10214	bm_nrf54ls05dk/nrf54ls05b/cpuapp/s115_softdevice
nRF54LV10 DK	PCA10188	bm_nrf54lv10dk/nrf54lv10a/cpuapp/s115_softdevice

S145:

Hardware platform	PCA	Board target
nRF54L15 DK	PCA10156	bm_nrf54l15dk/nrf54l15/cpuapp/s145_softdevice
nRF54L15 DK (emulating nRF54L10)	PCA10156	bm_nrf54l15dk/nrf54l10/cpuapp/s145_softdevice
nRF54L15 DK (emulating nRF54L05)	PCA10156	bm_nrf54l15dk/nrf54l05/cpuapp/s145_softdevice
nRF54LM20 DK	PCA10184	bm_nrf54lm20dk/nrf54lm20a/cpuapp/s145_softdevice
nRF54LS05 DK	PCA10214	bm_nrf54ls05dk/nrf54ls05b/cpuapp/s145_softdevice
nRF54LV10 DK	PCA10188	bm_nrf54lv10dk/nrf54lv10a/cpuapp/s145_softdevice

User interface

Button 0:

Prints out an event message.

Button 1:

Prints out an event message.

Button 2:

Prints out an event message.

Button 3:

Prints out an event message and terminates the program.

LED 0:

Lit when the device is initialized.

Building and running

This sample can be found under samples/peripherals/buttons/ in the Bare Metal folder structure.

For details on how to create, configure, and program a sample, see Getting Started with the samples.

Testing

You can test this sample by performing the following steps:

1. Compile and program the application.

2. Observe that the Buttons sample started message is printed.

3. Observe that the Buttons sample initialized, press Button 3 to terminate message is printed.

4. Press the buttons on the development kit. Observe the application printing a message when the buttons are pressed.

5. Press Button 3 on the development kit to terminate the application.