PPI - Programmable Peripheral Interconnect

The Programmable Peripheral Interconnect (PPI) sample demonstrates how to configure and use PPI with nRF Connect SDK Bare Metal option.

Requirements

The sample supports the following development kits:

Simple board variantsMCUboot board variants

The following board variants do not have DFU capabilities:

S115:

Hardware platform	PCA	Board target
nRF54L15 DK	PCA10156	bm_nrf54l15dk/nrf54l15/cpuapp/s115_softdevice
nRF54L15 DK (emulating nRF54L10)	PCA10156	bm_nrf54l15dk/nrf54l10/cpuapp/s115_softdevice
nRF54L15 DK (emulating nRF54L05)	PCA10156	bm_nrf54l15dk/nrf54l05/cpuapp/s115_softdevice
nRF54LM20 DK	PCA10184	bm_nrf54lm20dk/nrf54lm20a/cpuapp/s115_softdevice
nRF54LS05 DK	PCA10214	bm_nrf54ls05dk/nrf54ls05b/cpuapp/s115_softdevice
nRF54LV10 DK	PCA10188	bm_nrf54lv10dk/nrf54lv10a/cpuapp/s115_softdevice

S145:

Hardware platform	PCA	Board target
nRF54L15 DK	PCA10156	bm_nrf54l15dk/nrf54l15/cpuapp/s145_softdevice
nRF54L15 DK (emulating nRF54L10)	PCA10156	bm_nrf54l15dk/nrf54l10/cpuapp/s145_softdevice
nRF54L15 DK (emulating nRF54L05)	PCA10156	bm_nrf54l15dk/nrf54l05/cpuapp/s145_softdevice
nRF54LM20 DK	PCA10184	bm_nrf54lm20dk/nrf54lm20a/cpuapp/s145_softdevice
nRF54LS05 DK	PCA10214	bm_nrf54ls05dk/nrf54ls05b/cpuapp/s145_softdevice
nRF54LV10 DK	PCA10188	bm_nrf54lv10dk/nrf54lv10a/cpuapp/s145_softdevice

Overview

The sample sets up an LED to be toggled when a timer compare event is triggered.

User interface

LED 0:

Lit when the device is initialized.

LED 1:

Blinking when the timer is running.

Building and running

This sample can be found under samples/peripherals/ppi/ in the Bare Metal folder structure.

For details on how to create, configure, and program a sample, see Getting Started with the samples.

Testing

You can test this sample by performing the following steps:

1. Compile and program the application.

2. Connect to the kit that runs this sample with a terminal emulator (for example, the Serial Terminal app).

3. Reset the kit.

4. In the Serial Terminal, observe that the PPI sample initialized message is printed.

5. Observe that LED 1 is blinking.