ENE KB1200_EVB

Overview

The KB1200_EVB kit is a development platform to evaluate the ENE KB1200 series microcontrollers. This board needs to be mated with part number KB1200.

Hardware

  • ARM Cortex-M4F Processor

  • 512KB Flash and 320KB RAM

  • ADC & GPIO headers

  • SER1, SER2 and SER3

  • FAN PWM interface

  • ENE Debug interface

Supported Features

The kb1200_evb board supports the hardware features listed below.

on-chip / on-board
Feature integrated in the SoC / present on the board.
2 / 2
Number of instances that are enabled / disabled.
Click on the label to see the first instance of this feature in the board/SoC DTS files.
vnd,foo
Compatible string for the Devicetree binding matching the feature.
Click on the link to view the binding documentation.

System Clock

The KB1200 MCU is configured to use the 96Mhz internal oscillator with the on-chip DPLL to generate a resulting EC clock rate of 96MHz/48MHz/24MHz/12MHz. See Processor clock control register (refer 5.1 General Configuration)

Programming and Debugging

The kb1200_evb board supports the runners and associated west commands listed below.

flash debug

Flashing

If the correct headers are installed, this board supports SWD Debug Interface.

To flash with SWD, install the drivers for your programmer, for example: SEGGER J-link’s drivers are at https://www.segger.com/downloads/jlink/

Debugging

Use SWD with a J-Link

References