R-Car Salvator-XS

Overview

The R-Car M3-W is an SOC that features the basic functions for next-generation car navigation systems.

Hardware

The R-Car M3-W includes:

  • two 1.5-GHz ARM Cortex-A57 MPCore cores;

  • four 1.3-GHz ARM Cortex-A53 MPCore cores,

  • memory controller for LPDDR4-3200 with 32 bits x 2 channels;

  • 1 channels for HDMI1.4b output and 1 channel for RGB888 output and 1channel for LVDS;

  • 2 channels MIPI-CSI2 Video Input, 2 channels digital Video Input;

  • USB3.0 x 1ch and USB2.0 x 2ch interfaces;

  • 800-MHz ARM Cortex-R7 core;

  • two- and three-dimensional graphics engines;

  • video processing units;

  • sound processing units;

  • MediaLB interface;

  • SD card host interface;

  • USB3.0 and USB2.0 interfaces;

  • PCI Express interface;

  • CAN interface;

  • EtherAVB.

Hardware capabilities for the Salvator-XS for can be found on the eLinux Salvator-XS page.

Supported Features

The rcar_salvator_xs board supports the hardware features listed below.

on-chip / on-board
Feature integrated in the SoC / present on the board.
2 / 2
Number of instances that are enabled / disabled.
Click on the label to see the first instance of this feature in the board/SoC DTS files.
vnd,foo
Compatible string for the Devicetree binding matching the feature.
Click on the link to view the binding documentation.

Programming and Debugging

Build and flash applications as usual (see Building an Application and Run an Application for more details).

References